Update Rollup 2 for Exchange Server 2007 Service Pack 1

Certifications and honors

Syndicate This Blog

Last Google search to here

storport.sys 5.2.3790.4021
70-649 review
presence status ocs problem

Saturday, May 10. 2008

Update Rollup 2 for Exchange Server 2007 Service Pack 1

I know a few people that have run into KB 947360 and especially KB 947391, to the point of looking into a third party PST importation tool.

It is good to know these are fixed.

Update Rollup 2 for Exchange Server 2007 SP1 fixes:

KB 940462 - The public folder store may take several minutes to mount on an Exchange 2007 server

KB 944153 - Exchange Server 2007 does not have Transport Neutral Encapsulation Format (TNEF) capabilities for POP and IMAP protocols

KB 945917 - You receive an error message when you try to access the Microsoft Office Outlook Web Access global address list in a Microsoft Exchange Server 2007 environment

KB 947346 - Exchange Server 2007 mailbox users cannot retrieve the free/busy information for Exchange Server 2003 mailbox users in a large Exchange Server organization that has more than 100 administrative groups

KB 947360 - Error message occurs, and users cannot access the free/busy information after you use the Import-Mailbox cmdlet to import data to a mailbox in Exchange Server 2007 Service Pack 1

KB 947391 - The contents of .pst files are not imported into Exchange Server 2007 mailboxes when you use the Import-Mailbox cmdlet

KB 947451 - A recipient sees unexpected text in the top of an e-mail message that you send in Exchange Server 2007

KB 947458 - The Edgetransport.exe process may crash on an Edge server that is running Exchange Server 2007 Service Pack 1

KB 947551 - The Edgetransport.exe process may crash intermittently on an Exchange Server 2007 Service Pack 1 Edge server

KB 947577 - If you try to connect a mobile device to a mailbox server through a server that is running Exchange Server 2007, the mobile device may be unable to connect

KB 947646 - Event ID 12011 is logged every time that the MSExchangeTransport service starts after you install Exchange Server 2007 Service Pack 1 on a computer that is running the German version of Windows Server 2003

KB 948047 - An event ID 1080 message is logged in the System log every three seconds after you run the Set-ExchangeServer command to set the static domain controllers on an Exchange 2007 cluster node

KB 948297 - The OOF template may be delivered as an attachment in an Exchange 2007 environment when you use the "Reply with Template" option in Microsoft Outlook

KB 948332 - Failover takes a long time to finish in an Exchange Server 2007 cluster continuous replication environment

KB 948374 - The EdgeTransport.exe process crashes intermittently, and event ID 1033 is logged in Exchange Server 2007

KB 948666 - When you try to migrate a mailbox from Exchange Server 2003 to Exchange Server 2007, the Exchange Management Shell may stop responding

KB 948830 - The MSExchangeSyncAppPool application pool crashes on a server that hosts an Exchange Server 2007 Client Access Server role

KB 948831 - A user may be unable to synchronize with an Exchange Server mailbox from a mobile device when a Client Access server has been upgraded to Exchange Server 2007 Service Pack 1

KB 948844 - An exception occurs, and event IDs 4999 and 5000 are logged when you modify the Outlook Web Access user interface

KB 949186 - When you try to run the Restore-mailbox cmdlet on a server that is running Exchange Server 2007, you receive an error message

KB 949193 - The address rewrite agent does not rewrite the address for Out of Office (OOF) messages in Exchange Server 2007

KB 949463 - An exception error is generated after you run a Set-AttachmentfilterListConfig command together with the ExceptionConnectors option on an Exchange 2007 S949463-based server

KB 949541 - You cannot log on to Outlook Web Access Light, and an error message occurs in Exchange Server 2007

KB 949703 - Error message in Outlook when you click the signature icon of a signed e-mail message that an Exchange Server 2007-based Edge server receives: "The digital signature is invalid"

KB 949726 - After you install Exchange Server 2007 Service Pack 1, the Set-ExcecutionPolicy task causes an error message, and event ID 103 is logged

KB 949772 - If you run the "isinteg -dump" command against a dismounted store on a server that is running Exchange Server 2007, the Store.exe process stops unexpectedly

KB 950123 - Error message after you apply Update Rollup 1 for Exchange Server 2007 Service Pack 1 in a Japanese environment: "Public Folder Management Console is not an allowed Snap-in"

in Exchange, Microsoft at 15:56 | Comments (9)

2068 hits

Trackbacks

Trackback specific URI for this entry

No Trackbacks

Comments

Display comments as (Linear | Threaded)

Have you heard any rumblings about this update causing different issues? I have heard of one instance where (from the msexchange team's blog) someone had issues with services, etc; but that is it.

MK

#1 Micheal Kilpatric (Homepage) on 2008-05-13 11:50 (Reply)

I will ask around but so far I have only heard positive things about this update. I know some of the rollup updates from the past would have small issues here and there but so far, people have been happy with it.

#1.1 Aaron Tiensivu (Homepage) on 2008-05-13 12:02 (Reply)

We have the same problem.
Installed a clean ex2007sp1 CAS-only-server. Installed rollup2. It took 5 hours for "Optimizing .NET assemblies" at the end of the installation. Now we have 3 services that wont start: IMAP4, POP3 and "Microsoft Exchange Service Host".

#1.1.1 Peter Kerkhofs on 2008-05-22 05:56 (Reply)

i added the follwing line to the hosts table:

127.0.0.1 crl.microsoft.com

and now the services start.
Our exchange servers do not have a coonection to the internet.

Remaining question is: is this an acceptable solution, am i not missing
something??

Peter

#1.1.1.1 Peter Kerkhofs on 2008-05-22 07:45 (Reply)

Actually I have had issues with it. After installing it the IMAP and Exchange Service Host would no longer start and time out. No error is give that I can find. In addition EMC and EMS take a long time to start. I have yet to find anyone till now that has heard of these problems.

If anyone knows the cause I would appreciate some feedback.

#1.2 Dan on 2008-05-14 11:32 (Reply)

Here is some feedback I've had from others (edited to remove personal info):

"I have installed Rollup 2 on four Exchange 2007 Servers and I have not had any issues yet. Two servers are a CCR Cluster and the other two servers are CAS/HUB. None of my servers have IMAP enabled. "

"I have a customer running it on 6 servers, and they are supporting IMAP, with no issues."

I know that doesn't help your cause, but I'm still trying to figure out a root cause for the people having the issue. I am wondering if it is dependent on a certain .NET hotfix or service pack.

#1.2.1 Aaron Tiensivu (Homepage) on 2008-05-14 12:15 (Reply)

Thank you for looking into it. I'm still have the problem and have double checked my .net versions. I have both 2.0 and 3.0 installed patched to latest level as far as I can tell.

I have a CCR cluster with two CAS/HUB servers as well. I have it also setup in a virtual environment the same way with both Server 2003 and Server 2008.

The only thing I'm doing odd is I'm using the full demo version of Exchange 2007 SP-1 you can download from MS. I then enter our license keys and it works fine. The reason for this is I only have access to Exchange 2007 media that contains SP-1.

Thanks,

#1.2.1.1 Dan on 2008-05-14 16:12 (Reply)

Thanks I appreciate it. I am not finding much negative at all, but I am trying to perform my due dilligence on this...

Regards,
MK

#2 Micheal Kilpatric (Homepage) on 2008-05-13 12:04 (Reply)

We are having a small issue with OWA after Rollup2 Installed.
Upon navigating to "https://server.domain.net/owa" we're getting a "Service Unavailable" error message.

If anyone can provide some feedback i would greatly appreciate it.

Thanks

#3 Carlos Jimenez (Homepage) on 2008-05-23 11:17 (Reply)

Add Comment

Name
Email
Homepage
In reply to
Comment	E-Mail addresses will not be displayed and will only be used for E-Mail notifications Standard emoticons like :-) and ;-) are converted to images. Enclosing asterisks marks text as bold (word), underscore are made via _word_.
	Remember Information? Subscribe to this entry